Wind streamlines curving around low-rise and mid-rise urban buildings on a grid, with a street-level human figure for scale.

Should municipalities require a wind assessment for new developments?

Municipalities should require a wind assessment for new developments in most cases — particularly when a project involves tall buildings, high-density areas, or publicly accessible spaces. In the Netherlands, the NEN 8100 standard provides a clear framework for when a wind study is needed, and many municipalities already include it as a condition in their permit processes. Below, we answer the most common questions about wind assessments, permit requirements, and how outcomes actually influence planning decisions.

When is a wind assessment legally required for a new development?

A wind assessment is legally required when a municipality includes it as a condition in the environmental permit or zoning plan. In the Netherlands, the NEN 8100 standard is the recognised norm for pedestrian wind comfort, and most municipalities apply it to buildings that are taller than their surroundings or that introduce significant changes to the urban layout. There is no single national law that mandates a wind study for every project — the requirement depends on the municipality and the nature of the development.

In practice, a wind assessment is almost always required or strongly recommended in these situations:

  • High-rise buildings of 30 metres or taller, especially when they are significantly taller than neighbouring buildings
  • Large-scale area developments with multiple new buildings
  • Projects near publicly accessible spaces such as squares, parks, or shopping streets
  • Developments near waterfronts or open terrain where wind acceleration is likely
  • Renovation or extension projects that change the aerodynamic profile of an existing building

For international projects outside the Netherlands, the Lawson criteria serve the same purpose. Both NEN 8100 and Lawson classify wind conditions by activity type — sitting, strolling, walking through — and set thresholds for what is acceptable in each context. Knowing which standard your municipality or client expects before you commission a study saves time and avoids having to redo the work in a different format.

Our wind engineering services cover both NEN 8100 and Lawson assessments, so whether your project is in Rotterdam, London, or Gibraltar, you get a report in the right format from the start.

What happens if a wind study is skipped or submitted too late?

Skipping or delaying a wind assessment can stall a permit application, trigger costly design revisions, or result in conditions being imposed after construction. If a municipality requires a wind study and it is missing from the application, the permit process simply stops until the study is delivered. That delay can push back a project by weeks or months.

The bigger risk is discovering wind problems late. When a wind assessment is done after the design is finalised, the options for solving problems are limited and expensive. Changing a building’s orientation, adding setbacks, or redesigning a ground-floor facade all become much harder once the structural design is locked in. The knowledge base from the Rotterdam pilot study confirms this directly: solving wind problems at the urban planning level is far easier than addressing them at the building level after the fact.

There is also a reputational dimension. A report that fails scrutiny at the permit desk — because it used the wrong standard, omitted relevant buildings, or drew conclusions the methodology cannot support — reflects poorly on the design team and can create friction with the municipality. Getting the study right the first time matters as much as getting it in on time.

What’s the difference between a pedestrian wind comfort study and a wind loading assessment?

A pedestrian wind comfort study assesses the wind conditions that people experience at ground level around a building. A wind loading assessment calculates the forces that wind exerts on the building structure itself. They answer different questions, use different methods, and serve different parts of the design and permit process.

Here is a quick comparison:

Study type What it measures Who uses it Applicable standard
Pedestrian wind comfort Wind speed and frequency at eye level (1.75 m) Architects, planners, municipalities NEN 8100 / Lawson
Wind loading Wind pressure on facades and structural elements Structural engineers, facade contractors NEN-EN 1991-1-4 (Eurocode)

A pedestrian wind comfort study tells you whether the square in front of a new office tower is pleasant enough for outdoor seating, or whether the entrance to a residential building will be too windy for safe use. The result is a colour-coded comfort map showing which areas meet which activity class under NEN 8100.

A wind loading assessment tells your structural engineer how much force the facade panels need to resist, and whether the cladding fixings are strong enough. It feeds directly into the structural calculations and procurement specifications for the building envelope.

Many projects need both, but at different stages. The comfort study is most useful early in the design phase, when there is still room to adjust the massing. The loading assessment typically follows once the geometry is more fixed. On the Actiflow website, you can find more information on both types of study and how they fit into a typical project timeline.

How do municipalities use wind assessment outcomes in planning decisions?

Municipalities use wind assessment outcomes to decide whether a development meets the wind comfort and safety thresholds set in their zoning policy. In practice, this means reviewing the NEN 8100 comfort classification for each relevant outdoor area and checking whether any location falls into the wind danger category — which is always unacceptable regardless of context.

When a wind study shows that a public space will be classified as comfort class D or E (poor conditions for the intended use), the municipality typically responds in one of three ways:

  1. Require design changes before approving the permit — for example, adjusting building height, adding setbacks, or repositioning a building entrance
  2. Impose conditions on the permit, such as requiring wind screens, covered walkways, or specific landscaping to mitigate the problem
  3. Accept the outcome in specific contexts — for example, a wind class D result in a through-route may be acceptable if the function of that space is purely transit and not lingering

The Rotterdam pilot study, carried out in collaboration with the Municipality of Rotterdam, showed how city-wide wind mapping can inform not just individual permit decisions but broader urban planning policy. Areas with poor ventilation potential, high wind danger near tall buildings like the Lloyd Tower, and locations where building clusters create favourable wind shadows all became visible in a single model. That kind of overview helps planners make more consistent decisions across an entire district rather than assessing each project in isolation.

Wind outcomes also influence where functions are placed. Playgrounds, terraces, and building entrances should never be positioned in the windiest spots on a site. A wind study makes those spots visible before anyone commits to a layout.

Should municipalities make wind assessments mandatory for all new developments?

Municipalities should make wind assessments mandatory for developments that meet certain thresholds — not for every new building regardless of scale. A blanket requirement for all developments would add unnecessary cost and delay to small-scale projects where wind impact is negligible. But for projects above a certain height or density, a mandatory wind assessment protects public space quality and prevents problems that are expensive to fix after the fact.

The case for mandatory assessments rests on a few practical arguments:

  • Wind problems are invisible until they are modelled. Developers and architects cannot reliably predict wind behaviour from visual inspection alone. A building that looks open and airy on a render can create dangerous downdraughts at street level.
  • The cost of a study is small relative to the cost of a late-stage redesign. Commissioning a wind assessment early in the design phase is far cheaper than modifying a facade or repositioning a building entrance after the structural design is complete.
  • Consistent requirements level the playing field. When wind assessments are optional, some developers skip them to save time or money. Mandatory requirements mean all projects in a given area are assessed against the same standard, making planning decisions more consistent.
  • Public spaces deserve protection. Squares, parks, and pedestrian routes are shared infrastructure. Their wind comfort affects the quality of life for everyone who uses them, not just the occupants of the new building.

A proportionate approach would set thresholds based on building height, proximity to public space, and the density of the surrounding area. Buildings taller than twice their surroundings, projects introducing more than a certain number of dwellings, or developments adjacent to major public squares are all good candidates for a mandatory requirement. Below those thresholds, a voluntary or advisory framework keeps the process proportionate.

The trend across Dutch municipalities is moving in this direction. More planning departments are including wind comfort as a standard condition rather than an afterthought, and the availability of CFD simulation tools has made it faster and more affordable to produce a credible assessment than it was a decade ago.

How Actiflow helps with wind assessments for new developments

We work with architects, project managers, structural engineers, and municipalities at every stage of the wind assessment process — from early design advice to the final report submitted with a permit application. With over 21 years of experience in wind engineering and a deep familiarity with NEN 8100 requirements across Dutch municipalities, we know what a report needs to contain to hold up under scrutiny.

Here is what we offer:

  • Pedestrian wind comfort assessments using advanced CFD simulations, producing colour-coded maps that you can present directly to planners, clients, or permit authorities
  • Wind loading studies for structural engineers and facade contractors, based on the relevant Eurocode standards
  • Large-scale area assessments for masterplans and city districts, including the kind of comprehensive study we carried out for the Municipality of Rotterdam
  • International projects assessed under the Lawson criteria, with experience in the UK, Gibraltar, Belgium, and beyond
  • Fast turnaround — for regular clients, we set everything aside to start the next day if needed, and our internal automation keeps delivery times short without compromising quality
  • Clear, practical advice on what to do when results show wind problems, including design hierarchy guidance from the urban planning level down to individual building measures

Curious how we can help with your wind assessment? Contact us and we will be happy to discuss your project and help you find the right approach. You can also find out more about our team and background on our about us page.

Related Articles